Shenzhou City Jumao Metal Products Co.,ltd
CUSTOMER SATISFY IS THE ETERNAL PURSUE OF CORPORATION.
Add to Cart
47" Fiberglass Drapery Baton Curtain Draw Rods Wand with SS Snap Hook
Drapery Curtain Draw Rods Wands – If smooth and sleek is what you fancy in curtain rods, there’s no greater curtain pole than the usual magnetic one; if you have no one handy to help hammer or twist in brackets, the magnetic pole needs to be your choice. It is a no-fuss choice and it’s ideal for those who have metal doors or window frames, as you’re able to put it up it without interfering with the installation.
People who have had no curtains since they have steel doors and doors that are too difficult to run through now have an option. What’s more, no tools are required and the job can be completed in the wink of an eye. Drapery curtain draw rod is quite easy to put in a magnetic curtain pole.You could pick a single or double pole and these may be had in any of three finishes, brass, white or off-white. If you say ‘yes’ to a magnetic curtain pole, it’s the easiest thing to install or remove, when you want a reversal of curtains or you need to launder them. Goodbye to screws, screws and hard drilling.
Regular size of JULI Fiberglass drapery curtain draw rods:
|
Item No. |
Diameter |
Length |
Attached part |
|
JULI-CA-36" |
9.5mm |
36" |
plastic Ring |
|
JULI-CB-36" |
9.5mm |
36" |
Steel Ring |
|
JULI-CA-48" |
9.5mm |
48" |
Plastic Ring |
|
JULI-CB-48" |
9.5mm |
48" |
Steel Ring |
|
JULI-CA-60" |
9.5mm |
60" |
Plastic Ring |
|
JULI-CB-60" |
9.5mm |
60" |
Steel Ring |
|
JULI-CA-72" |
9.5mm |
72" |
Plastic Ring |
|
JU;I-CB-72" |
9.5mm |
72" |
Steel Ring |
|
Any Custom Size can be Accepted To Make ! |
|||
Testing results for physical properties for drapery curtain draw rods:
|
(No.) |
Testing items |
Unit |
Testing results |
Testing standard |
|
1 |
Density |
g/cm3 |
1.85-1.9 |
ASTM D792 |
|
2 |
Water absorption |
% |
0.57 |
ASTM D570 |
|
3 |
Flexural strength |
MPa |
302 |
ASTM D790 |
|
4 |
Flexural modulus |
GPa |
18.6 |
ASTM D790 |
|
5 |
Tensile strength |
MPa |
210 |
ASTM D638 |
|
6 |
Tensile modulus |
GPa |
22 |
ASTM D638 |
|
7 |
Flame retardant rating |
|
V0/V1 |
UL94 |
|
8 |
Dielectric breakdown voltage |
KV |
14.98 |
ASTM D149-09 |
Notes: The above testing results are based on ordinary materials, if any special requirements, feel free to contact with us.
